Various Construction Engineering Problems Essay


Undertaking 1


Undertaking 2


Undertaking 3


Undertaking 4




Undertaking 1

We Will Write a Custom Essay Specifically
For You For Only $13.90/page!

order now

a )

The 3 types of edifice that I can place are Industrial, residential, recreational edifices

Industrial edificesare edifices that chiefly are used to fabricate merchandises that simplify the lives of worlds or for necessities of human life. These edifices are chiefly built around empty countries where no other edifices or people are because they sometimes produce exhausts that may be harmful to worlds. An illustration of an industrial edifice is a mill

Residential edificesare edifices that provide shelter for worlds. These edifices are built so that they can accommodate the comfort infinite of the specific homo that is interested in obtaining it. These edifices are one of the precedences of human life. An illustration of a residential edifice is a condominium.

Commercial edificesare edifices that are built for the leisure times of worlds. These edifices map for the free clip of worlds and provides them with activities to make to take up their free clip. These edifices thrive on the ennui of humanity, without which, they lose their map. An illustration of a recreational edifice is a shopping promenade.

Figure 1.1: Example of Industrial edifice

B )

My pick of edifice is the recreational edifice. The 2 constituents of infrastructure I choose to place are the foundation and the concrete slab. The two constituents of the superstructure that I choose to place are the roof and the floor.

degree Celsiuss )

The foundation sustains the weight of the whole construction and stabilizes it so that it anchors it into the land and keeps it from fall ining. The footer of the foundation is what makes it map as an ground tackle. The footer is shaped like an upside down T, so that it keeps it from tilting to the side which would convey an inevitable prostration to the construction.

The concrete slab holds the weight and burden of everything above it. It is what is beneath the flooring. It is normally covered by a bed of strengthened mesh. It is able to defy a big sum of weight upon it.

The roof provides shelter to those choice persons who are decently situated beneath it depending on the walls around them. The roof has many different types. All coming with their different advantages. Some supplying more airing than others. Most houses normally use a geometrically triangularly, while other normally vary depending on what type they are.

The floor is what we walk on in every construction. There are many different ways to adorn a floor, depending on what room that floor is in. The floor is supported by the floor beam, for which there are two types. The one-way and bipartisan slab. The one-way slab is merely composed two floor beams that are placed on either side of the floor which focuses the weight upon it in merely two waies. The two manner slab has a floor beam of all four sides, so it focuses the weight in 4 waies doing it more stable and structured.

Undertaking 2

a )

Soil probe is carried out for planing a right type of foundation safely and economically, a interior decorator must possess sufficient information about the physical belongingss and the agreement of implicit in stuffs. Without first proving the dirt in a suited research lab, we are unable to get down the procedure of building.

B )

The two types of dirt samples are disturbed and undisturbed samples

Disturbed samples are the samples of dirt which have been in contact with anything which will do it to alter its composing or province. Because it is disturbed, it is in no manner suited to be tested in a research lab. Disturbed dirt samples do non maintain the unmoved belongingss of the dirt when in the procedure of aggregation. Normally, scientists test the disturbed samples of dirt for texture, dirt type, wet content, every bit good as the food and contaminant analysis.

Undisturbed samples are samples of dirt which have non yet made contact with anything to alter it’s composing or province. Because of this, it is still in pristine status because is still contains the unity of the unmoved dirt and is perfect to be tested in a research lab to look into its suitableness for the undertaking. Undisturbed samples allow the designation of the belongingss of strength, permeableness, squeezability, every bit good as the break patterns among others.

Figure 2.1: Example of dirt trying tool

degree Celsiuss )

The procedure of drilling is to do a hole to roll up samples of dirt to prove for the undertaking.

Wash Boringis the procedure of hiting jets of H2O at the dirt to soften it so the tool can easy perforate the dirt. As the jets of H2O soften the dirt with its power, the drill spot makes contact with the dirt, perforating it more easy. All of the samples taken from Wash Boring are disturbed samples.

Auger Boringhas 2 types. Mechanical and Hand Augers. Hand Augers are used to tire at a deepness of 6 metres, but the Mechanical Plumber’s snakes can be used to bore to a deepness of 10 to 30 metres. The Auger drilling is the most versatile of the all the drillings since most of the drilling tools are much smaller compared to the options and are hence easier to travel about. The removed dirt can be used for field categorization and research lab testing. The dirt collected is considered undisturbed dirt.

Percussion Boringis the procedure of doing boreholes by striking the dirt so taking the dirt. It is repeatedly raised and lowered down the boreholes while suspended by wire from the power windlass. Water is circulated to convey dirt to the land surface. The dirt samples collected from this activity can be disturbed and undisturbed samples.

Undertaking 3

a )

There are subdivisions of the lumbers anatomy. The Bark, bast, growing rings, beams, sapwood, duramen and the pith. The bark is the difficult outer covering that protects the tree from harm. The bast is the portion that surround the cambium. The growing rings show the age of the tree. Each pealing stand foring a twelvemonth. Rays convey the nutrient and foods to the sapwood and duramen. The sapwood carries H2O, foods and minerals to the subdivisions and foliages. The duramen gives support to the tree and is a useable lumber for building. The pith is the centre of the tree.

B )

The three factors that affect the strength and lastingness of lumber are moisture content, denseness and defects

Moisture provides dimensional stableness, ability to work with, strength and lastingness. But a higher wet content will cut down the strength and lastingness of the wood. It can besides do the wood to disintegrate.

Wood with a higher than mean denseness will hold a higher strength because of the denseness of the microstructure. The denser the object the harder and stronger it is. A heavy stuff proves that the stuffs molecules are compressed against each other at a higher rate than norm.

There are multiple types of lumber defects. Each type holding different effects upon the lumber that they are blighting. Defects are fundamentally abnormalities in lumber which cause them to sometimes be impossible to work with if the defects can non be fixed

degree Celsiuss)

Natural defects:An illustration of which are knots. There are 5 types of knots. Margin, Splay, Face, Arris and Edge knot.

Conversion defects:Examples of which are inclining grain and ebb

Processing defects:It is caused due to improper drying methods. Examples of the defects and bow and spring.

Undertaking 4

a )

My pick of the roof system for the cottage house is the Double Howe truss. I chose this roof chiefly because it is visually appealing in both a geometric and an architectural manner. The Double Howe truss in my sentiment, is the nicest of them all to look at.

The truss fundamentally forms the skeleton of the roof of any construction. weight of the roof deck and the framing, and supports the walls. It besides prevents the walls from flexing or flexing.

I would besides prefer bituminous felt-bitumen as the roof covering which is assorted with a filler constituent such aslimestoneorsandorpolymersto give rigidness and tear opposition for the roof. Never been much of a fan of tiles since their care is expensive and hard if it’s holding jobs.

B )

The doctrine behind my pick of roof system is fundamentally that I would wish merely the usual roof that does non stand out but I want covering that does non interrupt or rupture easy. I do non desire anything that would in some manner make the house to look like an castaway among the other houses. Simplicity is how it should be and how I like it. There are 2 different types of roof systems. Pitch roofs and level roofs.

degree Celsiuss )



Title: Building Construction Illustrated

Writer: Francis D.K. Ching

Publisher: Wiley

Year: 4ThursdayEdition, 2005

Title: Basic Structures

Writer: Philip Garrison

Publisher: Wiley-Blackwell

Year: 1stEdition, 2011

Title: Materials for Architects and Builders

Writer: Arthur Lyons

Publisher: Elsevier

Year: 3rdEdition, 2008

Web sites:

Link: hypertext transfer protocol: //